The emergence of stone engraving machine provides another rare business opportunity in the building decoration industry. Just like the computer engraving machine a few years ago, it has been gradually accepted by people. The chest plate, Department plate, various indicator boards, crystal light box, building model, mold making, etc. carved by the computer engraving machine have gradually become popular in this industry. In the engraving machine application gradually popular at the same time, a variety of engraving machines are also gradually appearing in the market, how to choose a suitable engraving machine for users?

請注意以下幾點：

Please note the following:

1、要注意雕刻機的功能，石材雕刻機的雕刻電機有大功率和小功率之分。有些雕刻機功率較小只適合做雙色板、建筑模型、小型標牌、三維工藝品等材料的加工，這種工藝已流行一段時間，但由于雕刻功率太小而大大影響了其應用范圍。另一種是大功率雕刻頭的雕刻機，這種雕刻機有分為兩類，一類是大幅面切割機：幅面一般在一米以上，但這種雕刻機的精度一般較差；另一類是幅面適中的雕刻機：這種雕刻機一般應用于精細加工和有機標牌制作。

1. We should pay attention to the function of engraving machine. The carving motor of stone carving machine can be divided into high power and low power. Some engraving machines have low power and are only suitable for the processing of materials such as double color boards, building models, small signs, and three-dimensional handicrafts. This process has been popular for some time, but its application scope is greatly affected due to the low carving power. The other is the engraving machine with high-power engraving head, which can be divided into two categories: one is large format cutting machine: the format is generally more than one meter, but the accuracy of this engraving machine is generally poor; the other is the engraving machine with moderate format: This engraving machine is generally used in fine processing and organic label production.

2、要了解雕刻電機的性能和功能，雕刻機的雕刻頭電機也是很關鍵的，因?yàn)榈窨填^電機一般都不屬于保修范圍，而雕刻頭電機又是長時間連續工作的，所以如果雕刻頭電機不好也會影響雕刻機的使用。

2. To understand the performance and function of engraving motor, engraving head motor of engraving machine is also very important, because engraving head motor is generally not covered by warranty, and engraving head motor works continuously for a long time, so if engraving head motor is not good, it will also affect the use of engraving machine.

3、再者就是雕刻頭電機的速度可調范圍，一般速度可調范圍是每分鐘幾千到三萬轉，若速度不可調或速度可調范圍較小，那么就說明該雕刻機應用范圍就受到很大的限制，因?yàn)榈窨滩煌牟牧媳仨氂貌煌牡窨填^轉速。

3. In addition, the speed adjustable range of engraving head motor is generally thousands to 30000 revolutions per minute. If the speed is not adjustable or the speed adjustable range is small, then it means that the application range of the engraving machine is greatly limited, because different materials must use different carving head speed.

石材雕刻機

Stone carving machine

4、雕刻機本體制造工藝：大功率雕刻機工作時要求本體一定要精密和穩定，所以，長期大功率雕刻應采用鑄造本體才能使其加工精度高和穩定性能好。

4. Engraving machine body manufacturing process: high power engraving machine body must be precise and stable when it works. Therefore, long-term high-power engraving should use casting body to make its processing accuracy high and stable.

5、控制器一般也分為兩類：一類控制器只是做驅動，而其所有運算工作由電腦來完成，在雕刻機工作時電腦處于等待狀態，無法進行排版工作。另一類控制器采用單板機或單片機控制，這種控制器實際上就是一臺電腦，所以只要雕刻機一開始工作，電腦馬上就可以進行其他排版工作，特別是較長時間雕刻時，該優勢特別明顯。

5. The controller is generally divided into two types: one is only used for driving, and all the calculation work is completed by the computer. When the engraving machine is working, the computer is in a waiting state and cannot carry out typesetting. The other kind of controller is controlled by single board computer or single chip microcomputer. This kind of controller is actually a computer, so as long as the engraving machine starts to work, the computer can immediately carry out other typesetting work, especially when carving for a long time, this advantage is particularly obvious.