光纖激光切割機編制的程序不再需要手工修正，而是一個與理論刃口線完全一致的三維加工程序，可直接用于產品的切割。激光切割機將從激光器發射出的激光，經光路系統，聚焦成高功率密度的激光束。激光束照射到工件表面，使工件達到熔點或沸點，同時與光束同軸的高壓氣體將熔化或氣化金屬吹走。它可以保證切削過程中始終保持與實際切削刃狀態一致，不存在不能繪制的二維線。整個切割過程不需要人工干預，從源頭上保證產品的每一次加工都與數字化模型保持一致，使原來需要多次探索才能得到的切割邊線只完成3~4次。

　　The program compiled by the optical fiber laser cutting machine no longer needs manual correction, but is a three-dimensional processing program which is completely consistent with the theoretical cutting edge line and can be directly used for cutting products. The laser cutter will focus the laser beam emitted from the laser through the optical system into a high power density laser beam. The laser beam irradiates the surface of the workpiece, so that the workpiece reaches the melting point or boiling point. At the same time, the high-pressure gas coaxial with the beam will blow away the melted or gasified metal. It can ensure that the cutting process is always consistent with the actual cutting edge state, and there is no two-dimensional line that can not be drawn. The whole cutting process does not need manual intervention, from the source to ensure that each product processing is consistent with the digital model, so that the original need to explore many times before the cutting edge can only be completed 3 to 4 times.

　　用光纖激光切割機加工金屬時，線切割精度高，能切割厚板，但其缺點是速度慢。光纖激光切割機利用光纖激光發生器作為光源的激光切割機。光纖激光器是上新發展的一種新型光纖激光器輸出高能量密度的激光束，并聚集在工件表面上，使工件上被超細焦點光斑照射的區域瞬間熔化和氣化，通過數控機械系統移動光斑照射位置而實現自動切割。有時其他的方法需要穿孔和穿孔來切割，而且切割的尺寸也是非常有限的。激光切割可以沖切材料。切削速度快，加工尺寸范圍比線切割大得多。激光切割目前廣泛應用于金屬加工行業，激光切割速度快，精度高。中薄板、鋁板、不銹鋼等金屬板材的切割具有優勢，這就是光纖激光切割機不可替代的原因，相信隨著人們對激光切割產品需求的不斷增加，光纖激光切割的機會也越來越多。

 

　　When metal is machined by optical fiber laser cutting machine, WEDM has high precision and can cut thick plates, but its disadvantage is slow speed. Fiber laser cutting machine uses fiber laser generator as light source. Fiber laser is a new type of fiber laser developed in the world. It produces high energy density laser beams and gathers on the surface of the workpiece, which instantly melts and gasifies the area illuminated by the ultra-fine focus spot, and realizes automatic cutting by moving the spot illumination position through the numerical control mechanical system. Sometimes other methods need perforation and perforation to cut, and the size of cutting is very limited. Laser cutting can cut materials. The cutting speed is fast and the processing size range is much larger than that of wire cutting. Laser cutting is widely used in metal processing industry. Laser cutting is fast and accurate. The cutting of sheet metal, such as medium and thin plate, aluminium plate and stainless steel has absolute advantages, which is the reason why the optical fiber laser cutting machine can not be replaced. I believe that with the increasing demand for laser cutting products, the opportunities of optical fiber laser cutting are also increasing.

　　光纖激光切割機與其他切割方法有許多不同之處。光纖激光切割機利用光纖激光發生器作為光源的激光切割機。光纖激光器是上新發展的一種新型光纖激光器輸出高能量密度的激光束，并聚集在工件表面上，使工件上被超細焦點光斑照射的區域瞬間熔化和氣化，通過數控機械系統移動光斑照射位置而實現自動切割。對于某些金屬零件的切削加工，可以采用沖裁剪切工藝，效率高，速度快。而且成本也很低，但需要特定的模具和刀具才能進行切割，只能在薄的板材上進行沖切，而光纖激光切割機的激光切割與切割方法相比具有更好的靈活性，任何形狀的工件都可以在任何時候進行切割，而不需要模具上的點。

　　There are many differences between optical fiber laser cutting machine and other cutting methods. Fiber laser cutting machine uses fiber laser generator as light source. Fiber laser is a new type of fiber laser developed in the world. It produces high energy density laser beams and gathers on the surface of the workpiece, which instantly melts and gasifies the area illuminated by the ultra-fine focus spot, and realizes automatic cutting by moving the spot illumination position through the numerical control mechanical system. For the cutting of some metal parts, the punching and shearing process can be adopted, which has high efficiency and high speed. And the cost is also very low, but it requires specific dies and tools to cut, can only be punched on the thinnest sheet, and the laser cutting of optical fiber laser cutting machine is more flexible than the cutting method, any shape of the workpiece can be cut at any time, without the need for points on the die.

　　沖切工藝難以或不可能實現，因此并沒有得到廣泛的應用?；鹧媲懈钜彩墙饘兕I(lǐng)域中常用的切割工藝之一。切割的厚度范圍也很大，但與激光切割相比，切割表面的質量和精度相對較差，但厚板和加工的范圍要大于激光切割的范圍。因此，光纖激光切割機一般是用來切割較精細的。

　　Punching process is difficult or impossible to achieve, so it has not been widely used. Flame cutting is also one of the common cutting processes in metal field. The thickness range of cutting is also large, but compared with laser cutting, the quality and precision of cutting surface are relatively poor, but the thickness and processing range of thick plate are larger than laser cutting range. Therefore, optical fiber laser cutting machine is generally used to cut more fine.